Do you have any questions? Then please do not hesitate to contact us.

We are here for you.

Phone: +49 234 95388-0
service@hense-systeme.de

    * Mandatory fields

    HSG series

    Swivel motors for industrial applications
    In the basic version

    HSG swivel motors

    Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more.

    In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.

    HSG swivel motor sizes

    Special designs
    Below you will find our standard models. Of course, all models can also be customised to your individual requirements.
    Please send us your specific enquiry.

    • Size
    • Specific torque
      [Nm/bar]
    • Operating pressure
      [bar]
    • Nominal torque
      [Nm]
    • Swivelling angle
      [ degrees° ]
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
    • Data sheet
    • CAD file
    • 3D model
    • HSG 01 SZ
    • Specific torque
      [Nm/bar]
      1,19
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      238
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 01 SP
    • Specific torque
      [Nm/bar]
      1,19
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      238
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 02 SZ
    • Specific torque
      [Nm/bar]
      2,05
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      410
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 02 SP
    • Specific torque
      [Nm/bar]
      2,05
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      410
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 03 SZ
    • Specific torque
      [Nm/bar]
      3,83
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      766
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 03 SP
    • Specific torque
      [Nm/bar]
      3,83
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      766
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 04 SZ
    • Specific torque
      [Nm/bar]
      7,88
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      1576
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 04 SP
    • Specific torque
      [Nm/bar]
      7,88
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      1576
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 05 SZ
    • Specific torque
      [Nm/bar]
      15,53
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      3106
    • Swivelling angle
      [ degrees° ]
      260
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 05 SP
    • Specific torque
      [Nm/bar]
      15,53
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      3106
    • Swivelling angle
      [ degrees° ]
      260
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 06 SZ
    • Specific torque
      [Nm/bar]
      28,31
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      5662
    • Swivelling angle
      [ degrees° ]
      270
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 06 SP
    • Specific torque
      [Nm/bar]
      28,31
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      5662
    • Swivelling angle
      [ degrees° ]
      270
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 07 SZ
    • Specific torque
      [Nm/bar]
      55,13
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      8821
    • Swivelling angle
      [ degrees° ]
      280
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 07 SP
    • Specific torque
      [Nm/bar]
      55,13
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      8821
    • Swivelling angle
      [ degrees° ]
      280
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 08 SZ
    • Specific torque
      [Nm/bar]
      98,90
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      15824
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 08 SP
    • Specific torque
      [Nm/bar]
      98,90
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      15824
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 09 SZ
    • Specific torque
      [Nm/bar]
      164,59
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      26334
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 09 SP
    • Specific torque
      [Nm/bar]
      164,59
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      26334
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 10 SZ
    • Specific torque
      [Nm/bar]
      275,40
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      33048
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 10 SP
    • Specific torque
      [Nm/bar]
      275,40
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      33048
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 11 SZ
    • Specific torque
      [Nm/bar]
      468,81
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      56257
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage
    • HSG 11 SP
    • Specific torque
      [Nm/bar]
      468,81
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      56257
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImage
    • CAD fileImage
    • 3D modelImage

    Individual swivel motors

    We are also a development partner for

    As specialists for individual swivel motors, we at Hense combine over 50 years of experience with customized engineering. Our approach: innovation meets precision to meet your exact requirements. You can rely on our expertise and quality to meet your specific needs in the field of hydraulic drive technology.

    Contact us
    Can be used in many areas

    Typical areas of application

    General mechanical engineering
    Special machine construction
    Handling technology

    Product overview

    HSG series
    The swivel motors to control program-controlled sequences such as acceleration, travel and braking in open-loop or closed-loop systems using proportional or servo valves.
    HSE series
    The swivel motors also fulfill the function of end position damping with or without adjustable swivel angle limitation.
    HSB series
    The swivel motors are used when a swivel position must remain unchanged once a load torque has been applied.
    HSL series
    Servo-hydraulic controls can significantly expand the range of applications for rotary actuators.

    We are happy to help you

    Do you have any further questions?

      * Mandatory fields
      Dipl.-Ing. (FH) Rolf WinzenHead of Research & Development
      Download file!

      Bitte melden Sie sich an, um den gewünschten Download zu starten. Falls Sie keinen Account haben, können Sie sich im Folgenden registrieren.