The L-20 series is a particularly cost-effective solution that is suitable for a wide range of applications. It has versatile mounting options and a flange drive. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications.
It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 4,400 Nm at 210 bar.
L-20 series part-turn actuators - sizes
Special designs
Below you will find our standard models. Of course, all models can also be customised to your individual requirements.
Please send us your specific enquiry.
- Size
- Operating pressure
[bar] - Nominal torque
[Nm] - Holding torque
[Nm] - Swivelling angle
[ degrees° ] - Momentkapazität - Spreizmoment
[Nm] - Momentkapazität - Auslegermoment
[Nm]
- L20- 4.5-M-FT-180-…
- Operating pressure
[bar]207 - Nominal torque
[Nm]509 - Holding torque
[Nm]1333 - Swivelling angle
[ degrees° ]180 - Momentkapazität - Spreizmoment
[Nm]2543 - Momentkapazität - Auslegermoment
[Nm]1356
- L20- 8.2-M-FT-180-…
- Operating pressure
[bar]207 - Nominal torque
[Nm]927 - Holding torque
[Nm]2373 - Swivelling angle
[ degrees° ]180 - Momentkapazität - Spreizmoment
[Nm]4520 - Momentkapazität - Auslegermoment
[Nm]2486
- L20-15-M-FT-180-…
- Operating pressure
[bar]207 - Nominal torque
[Nm]1695 - Holding torque
[Nm]4375 - Swivelling angle
[ degrees° ]180 - Momentkapazität - Spreizmoment
[Nm]10170 - Momentkapazität - Auslegermoment
[Nm]5424
- L20-25-M-FT-180-…
- Operating pressure
[bar]207 - Nominal torque
[Nm]2825 - Holding torque
[Nm]7108 - Swivelling angle
[ degrees° ]180 - Momentkapazität - Spreizmoment
[Nm]22597 - Momentkapazität - Auslegermoment
[Nm]11300
- L20-39-M-FT-180-…
- Operating pressure
[bar]207 - Nominal torque
[Nm]4407 - Holding torque
[Nm]10532 - Swivelling angle
[ degrees° ]180 - Momentkapazität - Spreizmoment
[Nm]31640 - Momentkapazität - Auslegermoment
[Nm]15820
Individual part-turn actuators
We are development partners for
As specialists for individual part-turn actuators, we at Hense combine over 50 years of experience with customized engineering. Our recipe for success: innovation meets precision to meet your exact requirements. You can rely on our expertise and quality to meet your specific needs in the field of hydraulic drive technology.
Contact us
Product overview
L-10 series
The L-10 series has our smallest and most compact hydraulic drive with helical gearing. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.
L-20 series
The L-20 series is a particularly cost-effective solution that is suitable for a wide range of applications. Available in five standard sizes with an output torque of up to 4,400 Nm at 210 bar.
L-30 series
The L-30 series is perfect for heavy-duty applications, especially in harsh environments. Available in ten standard sizes with an output torque of up to 83,600 Nm at 210 bar.
T-Series
The T-series is suitable for applications where torque generation and higher cycle rates are the most important requirements. Available in three standard sizes with an output torque of up to 6,780 Nm at 210 bar.
