Do you have any questions? Then please do not hesitate to contact us.

We are here for you.

Phone: +49 234 95388-0
service@hense-systeme.de

    * Mandatory fields

    HSL series

    Swivel motors for industrial applications
    HSL - HYDRAULIC SWIVEL SYSTEMS WITH SERVO-HYDRAULIC CONTROL

    HSL swivel motors

    The use of servo-hydraulic controls can significantly extend the range of applications for swivel motors. Larger loads can be slewed in a shorter time than is possible with purely hydraulic systems, where the damping travel is fixed. In conjunction with such a control system, the acceleration and braking behavior of the swivel motors can be specifically adapted to the requirements. This means that even fast and very precise movements with large masses can be safely mastered.

    We offer customized solutions for a wide range of applications. Our qualified team will be happy to advise you on design and realization.

    HSL swivel motor sizes

    Special designs
    Below you will find our standard models. Of course, all models can also be customised to your individual requirements.
    Please send us your specific enquiry.

    • Size
    • Specific torque
      [Nm/bar]
    • Operating pressure
      [bar]
    • Nominal torque
      [Nm]
    • Swivelling angle
      [ degrees° ]
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
    • Data sheet
    • HSL 01 SZ
    • Specific torque
      [Nm/bar]
      1,19
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      238
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 01 SP
    • Specific torque
      [Nm/bar]
      1,19
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      238
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 02 SZ
    • Specific torque
      [Nm/bar]
      2,05
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      410
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 02 SP
    • Specific torque
      [Nm/bar]
      2,05
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      410
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 03 SZ
    • Specific torque
      [Nm/bar]
      3,83
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      766
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 03 SP
    • Specific torque
      [Nm/bar]
      3,83
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      766
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 04 SZ
    • Specific torque
      [Nm/bar]
      7,88
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      1576
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 04 SP
    • Specific torque
      [Nm/bar]
      7,88
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      1576
    • Swivelling angle
      [ degrees° ]
      250
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 05 SZ
    • Specific torque
      [Nm/bar]
      15,53
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      3106
    • Swivelling angle
      [ degrees° ]
      260
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 05 SP
    • Specific torque
      [Nm/bar]
      15,53
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      3106
    • Swivelling angle
      [ degrees° ]
      260
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 06 SZ
    • Specific torque
      [Nm/bar]
      28,31
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      5662
    • Swivelling angle
      [ degrees° ]
      270
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 06 SP
    • Specific torque
      [Nm/bar]
      28,31
    • Operating pressure
      [bar]
      200
    • Nominal torque
      [Nm]
      5662
    • Swivelling angle
      [ degrees° ]
      270
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 07 SZ
    • Specific torque
      [Nm/bar]
      55,13
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      8821
    • Swivelling angle
      [ degrees° ]
      280
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 07 SP
    • Specific torque
      [Nm/bar]
      55,13
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      8821
    • Swivelling angle
      [ degrees° ]
      280
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 08 SZ
    • Specific torque
      [Nm/bar]
      98,90
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      15824
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 08 SP
    • Specific torque
      [Nm/bar]
      98,90
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      15824
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 09 SZ
    • Specific torque
      [Nm/bar]
      164,59
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      26334
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 09 SP
    • Specific torque
      [Nm/bar]
      164,59
    • Operating pressure
      [bar]
      160
    • Nominal torque
      [Nm]
      26334
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 10 SZ
    • Specific torque
      [Nm/bar]
      275,40
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      33048
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 10 SP
    • Specific torque
      [Nm/bar]
      275,40
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      33048
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage
    • HSL 11 SZ
    • Specific torque
      [Nm/bar]
      468,81
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      56257
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      Z
    • Data sheetImageImage
    • HSL 11 SP
    • Specific torque
      [Nm/bar]
      468,81
    • Operating pressure
      [bar]
      120
    • Nominal torque
      [Nm]
      56257
    • Swivelling angle
      [ degrees° ]
      290
    • Shaft end:
      (P) toothed shaft
      (Z) keyway key
      P
    • Data sheetImageImage

    Individual swivel motors

    We are also a development partner for

    As specialists for individual swivel motors, we at Hense combine over 50 years of experience with customized engineering. Our approach: innovation meets precision to meet your exact requirements. You can rely on our expertise and quality to meet your specific needs in the field of hydraulic drive technology.

    Contact us
    Can be used in many areas

    Typical areas of application

    General mechanical engineering
    Special machine construction
    Handling technology

    Product overview

    HSG series
    The swivel motors to control program-controlled sequences such as acceleration, travel and braking in open-loop or closed-loop systems using proportional or servo valves.
    HSE series
    The swivel motors also fulfill the function of end position damping with or without adjustable swivel angle limitation.
    HSB series
    The swivel motors are used when a swivel position must remain unchanged once a load torque has been applied.
    HSL series
    Servo-hydraulic controls can significantly expand the range of applications for rotary actuators.

    We are happy to help you

    Do you have any further questions?

      * Mandatory fields
      Dipl.-Ing. (FH) Rolf WinzenHead of Research & Development
      Download file!

      Bitte melden Sie sich an, um den gewünschten Download zu starten. Falls Sie keinen Account haben, können Sie sich im Folgenden registrieren.