Do you have any questions? Then please do not hesitate to contact us.

We are here for you.

Phone: +49 234 95388-0
service@hense-systeme.de

Error: Contact form not found.

With hydraulically releasable holding brake

Rotary actuator HSB

Series for industrial applications

Our HSB series rotary actuator can be used for any installation position. The rotary actuator with attached hydraulically released spring-applied multi-disc brake is recommended if a swivel position once reached must remain unchanged – even over an unlimited period of time – despite the effect of a load torque. The brake is used solely to hold the load. It should only be noted that large transmission delays in the cables can cause time differences between the rotary actuators being switched off and the released brake being applied via spring force.

In order to provide our customers with the right actuator for all areas of application, the HSB rotary actuators are available in a total of 5 different variants. We have listed the most important data below. All further details can be found in our data sheet.

HSB rotary actuators sizes

Special designs
Below you will find our standard models. Of course, all models can also be customised to your individual requirements.
Please send us your specific enquiry.

  • Size
  • Specific torque
    [Nm/bar]
  • Operating pressure
    [bar]
  • Nominal torque
    [Nm]
  • Holding torque
    [Nm]
  • Swivelling angle
    [ degrees° ]
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key
  • Data sheet
  • HSB 01 / V SZ
  • Specific torque
    [Nm/bar]    1,19
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    238
  • Holding torque
    [Nm]    300
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 01 / V SP
  • Specific torque
    [Nm/bar]    1,19
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    238
  • Holding torque
    [Nm]    300
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 02 / V SZ
  • Specific torque
    [Nm/bar]    2,05
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    410
  • Holding torque
    [Nm]    380
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 02 / V SP
  • Specific torque
    [Nm/bar]    2,05
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    410
  • Holding torque
    [Nm]    380
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 03 / V SZ
  • Specific torque
    [Nm/bar]    3,83
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    766
  • Holding torque
    [Nm]    700
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 03 / V SP
  • Specific torque
    [Nm/bar]    3,83
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    766
  • Holding torque
    [Nm]    700
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 04 / V SZ
  • Specific torque
    [Nm/bar]    7,88
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    1576
  • Holding torque
    [Nm]    1500
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 04 / V SP
  • Specific torque
    [Nm/bar]    7,88
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    1576
  • Holding torque
    [Nm]    1500
  • Swivelling angle
    [ degrees° ]    250
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 05 / H SZ
  • Specific torque
    [Nm/bar]    15,53
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    3106
  • Holding torque
    [Nm]    1250
  • Swivelling angle
    [ degrees° ]    260
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 05 / H SP
  • Specific torque
    [Nm/bar]    15,53
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    3106
  • Holding torque
    [Nm]    1250
  • Swivelling angle
    [ degrees° ]    260
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 05 / V SZ
  • Specific torque
    [Nm/bar]    15,53
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    3106
  • Holding torque
    [Nm]    2500
  • Swivelling angle
    [ degrees° ]    260
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 05 / V SP
  • Specific torque
    [Nm/bar]    15,53
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    3106
  • Holding torque
    [Nm]    2500
  • Swivelling angle
    [ degrees° ]    260
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 06 / H SZ
  • Specific torque
    [Nm/bar]    28,31
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    5662
  • Holding torque
    [Nm]    2500
  • Swivelling angle
    [ degrees° ]    270
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 06 / H SP
  • Specific torque
    [Nm/bar]    28,31
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    5662
  • Holding torque
    [Nm]    2500
  • Swivelling angle
    [ degrees° ]    270
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 06 / V SZ
  • Specific torque
    [Nm/bar]    28,31
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    5662
  • Holding torque
    [Nm]    5000
  • Swivelling angle
    [ degrees° ]    270
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 06 / V SP
  • Specific torque
    [Nm/bar]    28,31
  • Operating pressure
    [bar]    200
  • Nominal torque
    [Nm]    5662
  • Holding torque
    [Nm]    5000
  • Swivelling angle
    [ degrees° ]    270
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 07 / H SZ
  • Specific torque
    [Nm/bar]    55,13
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    8821
  • Holding torque
    [Nm]    5000
  • Swivelling angle
    [ degrees° ]    280
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 07 / H SP
  • Specific torque
    [Nm/bar]    55,13
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    8821
  • Holding torque
    [Nm]    5000
  • Swivelling angle
    [ degrees° ]    280
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 07 / V SZ
  • Specific torque
    [Nm/bar]    55,13
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    8821
  • Holding torque
    [Nm]    10000
  • Swivelling angle
    [ degrees° ]    280
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 07 / V SP
  • Specific torque
    [Nm/bar]    55,13
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    8821
  • Holding torque
    [Nm]    10000
  • Swivelling angle
    [ degrees° ]    280
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 08 / H SZ
  • Specific torque
    [Nm/bar]    98,90
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    15824
  • Holding torque
    [Nm]    10000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 08 / H SP
  • Specific torque
    [Nm/bar]    98,90
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    15824
  • Holding torque
    [Nm]    10000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 08 / V SZ
  • Specific torque
    [Nm/bar]    98,90
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    15824
  • Holding torque
    [Nm]    15000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 08 / V SP
  • Specific torque
    [Nm/bar]    98,90
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    15824
  • Holding torque
    [Nm]    15000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 09 / H SZ
  • Specific torque
    [Nm/bar]    164,59
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    26334
  • Holding torque
    [Nm]    15000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 09 / H SP
  • Specific torque
    [Nm/bar]    164,59
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    26334
  • Holding torque
    [Nm]    15000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 09 / V SZ
  • Specific torque
    [Nm/bar]    164,59
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    26334
  • Holding torque
    [Nm]    25000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 09 / V SP
  • Specific torque
    [Nm/bar]    164,59
  • Operating pressure
    [bar]    160
  • Nominal torque
    [Nm]    26334
  • Holding torque
    [Nm]    25000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 10 / H SZ
  • Specific torque
    [Nm/bar]    275,40
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    33048
  • Holding torque
    [Nm]    15000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 10 / H SP
  • Specific torque
    [Nm/bar]    275,40
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    33048
  • Holding torque
    [Nm]    15000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 10 / V SZ
  • Specific torque
    [Nm/bar]    275,40
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    33048
  • Holding torque
    [Nm]    30000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 10 / V SP
  • Specific torque
    [Nm/bar]    275,40
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    33048
  • Holding torque
    [Nm]    30000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 11 / H SZ
  • Specific torque
    [Nm/bar]    468,81
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    56257
  • Holding torque
    [Nm]    30000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 11 / H SP
  • Specific torque
    [Nm/bar]    468,81
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    56257
  • Holding torque
    [Nm]    30000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image
  • HSB 11 / V SZ
  • Specific torque
    [Nm/bar]    468,81
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    56257
  • Holding torque
    [Nm]    60000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    Z
  • Data sheet Image
  • HSB 11 / V SP
  • Specific torque
    [Nm/bar]    468,81
  • Operating pressure
    [bar]    120
  • Nominal torque
    [Nm]    56257
  • Holding torque
    [Nm]    60000
  • Swivelling angle
    [ degrees° ]    290
  • Shaft end:
    (P) toothed shaft
    (Z) keyway key    P
  • Data sheet Image

Individual swivel motors

We are also a development partner for

As specialists for individual swivel motors, we at Hense combine over 50 years of experience with customized engineering. Our approach: innovation meets precision to meet your exact requirements. You can rely on our expertise and quality to meet your specific needs in the field of hydraulic drive technology.

Contact us
Can be used in many areas

Typical areas of application

General mechanical engineering
Special machine construction
Handling technology

Product overview

HSG rotary actuator
The rotary actuators to control program-controlled sequences such as acceleration, travel and deceleration in open-loop or closed-loop systems using proportional or servo valves.
Learn more
Rotary actuator HSE
The rotary actuators also fulfill the function of end position damping with or without adjustable swivel angle limitation.
Learn more
Rotary actuator HSB
The rotary actuators are used when a swivel position must remain unchanged once a load torque has been applied.
Learn more
Rotary actuator HSL
Servo-hydraulic controls can significantly expand the range of applications for rotary actuators.
Learn more

We are happy to help you

Do you have any further questions?

    * Mandatory fields
    I accept the privacy policy. This form is protected by Google reCaptcha.
    Dipl.-Ing. (FH) Rolf WinzenHead of Research & Development
    Fon: 0234 - 95388 - 31rolf.winzen@hense-systeme.de

    © 2025 - Hense Systemtechnik GmbH & Co. KG

    Download file!

    Please log in or create a customer account to get access to all 3D models, technical drawings and spare parts information.